Azo Favorite Aerobic 1700 Carpet and Module is a 7/16" thick indoor-outdoor velour pattern industrial flooring product designed for sports applications such as aerobics, weight rooms with free falling weights and extra heavy commercial recessed entrances. Favorite Aerobic 1700 resists UV, salt, golf spikes, ski boots and skates. The product has a 9/16" NSF foam backing (sodium silicate foam rubber) for a total approx. 1" gauge.
Special Order Colors
AZO Favorite Aerobic 1700 is manufactured as a proprietary Fiber V-loop very high density double needled 7/16" gauge velour construction from blended 100% heavy denier (18-240 d.p.f.) solution colored branded ASOTA olefin fibers, in a UV light fade- and chemical and mildew resistant product. The materials have a primary latex backing that extends to the middle of the carpet, but shall not extend to the pile fiber. For crush resistance and clean-ability the carpet shall not have a latex or acrylic finish impregnated face fiber so as to mask minimum presence of heavy denier fibers and lack of needling density.
A proprietary 9/16" NSF foam backing (sodium silicate foam rubber) for a total approx. 1" gauge.
The NSF foam of AZO Favorite Aerobic 1700 does not bottom out like a conventional foam carpet backing. Favorite Aerobic is ideal for anti-fatigue applications, such as behind retail counters, in weight rooms (for free falling weights); for sports and aerobics applications, in healthcare physical rehabilitation facilities. The product is suitable for commercial recessed entrances. Favorite Aerobic is spike resistant and resists skis and skates.
Short Form Specification: (See Group II Specifications)
Carpet shall be Azo Favorite Aerobic 1700 (50 ozs/sy) 7/16" gauge double needled indoor outdoor carpet with proprietary 9/16" NSF foam backing (sodium silicate foam rubber) for a total approx. 1" gauge, as manufactured by ISO 9001 Certified Manufacturer AZO GMBH, Germany and as distributed by Tek Stil Concepts, Inc., P.O. Box 67, Haddonfield NJ 08033. Carpet shall be in rolls 6'6" x 40' (2m x 12m) in colors as selected by the Architect or Facility Owner. For crush resistance and clean-ability the carpet shall not have a latex or acrylic finish impregnated face fiber (sometimes used to mask minimum presence of heavy denier fibers and lack of needling density).
Please consult detailed installation instructions. In order to avoid the separation of foam from the carpet, the edges must be protected by ramps. For dimensional stability the product must be glued down with TSC-300 adhesive or other high quality carpet adhesives. Indoor installations may be made with Sigaway® Original and have the benefit that Sigaway® sticks to the foam, allowing later removal of the Mammoth without leafing foam deposits on the sub-floor. Please note that perimeter taped loose lay carpet can expand and form irreversible creases under rolling loads.
Use commercial high power dual motor beater bar type vacuum cleaners frequently. For periodic wet cleaning, use 140oF hot water extraction. For persistent soil use neutral, non film forming detergents, such as Taski R-50, by any accepted commercial wet carpet cleaning method. Follow detailed maintenance instructions.
Limitations of Warranty
Please consult details of limited warranty for UV resistance (outdoor applications); Commercial Abrasive Wear warranty; Spike and skate resistance Warranty.
Product purchase, purchase of adhesive TSC-300, and installation details must be registered at the time of installation.
In the event of a warranty claim established to the manufacturer's satisfaction, AZO GMBH agrees at its option, to repair or to replace the product out of current lines at the time of replacement. The labor costs of removing and/or reinstalling replacement materials and associated freight costs are to be borne by the purchaser. No liability will be assumed for any consequential damage, loss or expense. No liability will be assumed for commercial shade variations or for materials with visible defects after such materials have been installed.