Azo Cocos 1900 Carpet and Module is an indoor-outdoor ½" gauge velour pattern industrial flooring product designed for extra heavy commercial traffic. Cocos 1900 resists UV, pool chemicals, salt water, golf spikes, ski boots, skates and is suitable for commercial entrances. The product has a breathable water permeable backing.
Special Order Colors
AZO Cocos 1900 is manufactured as a proprietary Fiber V-loop double needled 7/16" gauge velour construction from blended 100% heavy denier (18-240 d.p.f.) solution colored branded ASOTA olefin fibers, in a UV light fade- and chemical and mildew resistant product. The materials have a primary latex backing that extends to the middle of the carpet, but shall not extend to the pile fiber. For crush resistance and clean-ability the carpet shall not have a latex or acrylic finish impregnated face fiber so as to mask minimum presence of heavy denier fibers and lack of needling density. A proprietary secondary backing is blended from natural and ground recycled rubber and penetrates into half the total thickness to make the carpet water permeable.
A proprietary secondary backing is blended from natural and ground recycled rubber and penetrates into half the total thickness to make the carpet water permeable.
Azo Cocos 1900 rolls are designed for extra heavy use in commercial entrances. The product acts as a brillo pad to remove mud from shoes, and after the dirt has dried, it will release from the fibers to be removed by vacuum cleaning.
Short Form Specification: (See Group V Specifications)
Carpet shall be Azo Cocos 1900 (62 ozs/sy) ½" gauge double needled indoor outdoor carpet as manufactured by ISO 9001 Certified Manufacturer AZO GMBH, Germany and as distributed by Tek Stil Concepts, Inc., P.O. Box 67, Haddonfield NJ 08033. Carpet shall be in rolls 6'6" x 50' (2m x 15m) in natural 409 color or charcoal 200 color, as selected by the Architect or Building Owner. For crush resistance and clean-ability the carpet shall not have a latex or acrylic finish impregnated face fiber so as to mask minimum presence of heavy denier fibers and lack of needling density.
The carpet must be glued over wood or metal platforms with approved TSC-300 adhesive. Alternately, on soil it may be stretched and held by buried supporting frames.
Use commercial high power dual motor beater bar type vacuum cleaners frequently. For periodic wet cleaning, use 140oF hot water extraction. For persistent soil use neutral, non film forming detergents, such as Taski R-50, by any accepted commercial wet carpet cleaning method. Follow detailed maintenance instructions.
Limitations of Warranty
Please consult details of limited warranty for UV resistance (outdoor applications); Commercial Abrasive Wear warranty; Spike and skate resistance Warranty.
Product purchase, purchase of adhesive TSC-300, and installation details must be registered at the time of installation.
In the event of a warranty claim established to the manufacturer's satisfaction, AZO GMBH agrees at its option, to repair or to replace the product out of current lines at the time of replacement. The labor costs of removing and/or reinstalling replacement materials and associated freight costs are to be borne by the purchaser. No liability will be assumed for any consequential damage, loss or expense. No liability will be assumed for commercial shade variations or for materials with visible defects after such materials have been installed.