High Technology Specialty Flooring
Cart 0

ESD Unifloor UC Series Details

Physical Properties

Surface Resistivity P.T.P. ASTM D257 <5.5 x="" 10="" sup="">7 ohms
Resistance to Ground EOS-ESD 7.01 <106 ohms
Combination Resistance Person / Heel Grounder/ Flooring ANSI/ESD STM97.1-2006 <3.5 e07="" b="">
Charge Decay Time FTMS 4046-101c <<.17 seconds="" b="">
Flammability Radiant Panel ASTM E648 .73W/cm², Class I
Smoke Density ASTM E-662, NFPA 258 <450 average="" smoking="" smoldering="" b="">
Residual Indentation LF-475A .002" average
Abrasive Wear, Taber 1000 gm weight H-18 wheels, 5000 cycles 1.1% loss of weight
Static Load Limit DIN 16961.2 >700 p.s.i.
Meets or exceeds minimum requirements
of Federal Specifications for flexibility,
dimensional stability, resistance to
reagents and residual indentation

 

 

Installation & Maintenance

Follow detailed installation instructions.
Installation of ESD Static Control Solid Vinyl Flooring.pdf PDF format  (2,580KB)

Install only on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per Moisture Limitation Specification

Rolls:
loose lay as mats  
Install with Sigaway® Electronic full surface conductive dry adhesive or with Sigaway® Original regular dry adhesive with Siga Circuit seam bridging tape.
Install with Uzin KE 2000 SL water based conductive adhesive

Heat welding
Permanently glued rolls must be heat welded.

Maintenance
Follow detailed maintenance instructions.  
Cleaning Instructions for ESD Static Control Flooring PDF format  (133KB)

Limited Warranties
Limited warranties vary by product, and are applicable only if materials are installed professionally on suitable and approved sub-floors Concrete Subfloors and Moisture Testing with approved adhesives and within the approved moisture limits, on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per.