ESD Dotfloor N-VHP Antistatic Rubber Details
Physical Properties
| Surface Resistivity P.T.P. | ASTM D257 | < 1 x 109 ohms |
| Resistance to Ground | EOS-ESD 7.01 | < 1.0 x 108 ohms |
| Charge Decay Time | FTMS 4046-101c | < .2 seconds |
| Electrostatic Charge shuffle test | AATCC 134 | < 2 |
| Flammability | Radiant Panel ASTM E648 | .73W/cm², Class I |
| Damage to burning cigarettes | DIN 51961 | No Damage |
| Dimensional Stability | DIN 51962 6 hours 80°C | No appreciable change |
| Residual Indentation | DIN 51955 | < .2 mm |
| Static Coefficient of Friction | DIN 51130 | R9 |
| Hardness | ASTM D2240 | 85± 5 Shore |
| Static Load Limit | DIN 16961.2 | > 700 p.s.i. |
Installation & Maintenance
Installation:
Follow detailed installation instructions.
Install only on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per Moisture Limitation Specification
Rolls:
Install with Uzin KE 2000 SL water based conductive acrylic adhesive
Install with conductive urethane or epoxy adhesive and copper grounding tape.
Tiles:
Install with conductive urethane or epoxy adhesive and copper grounding tape.
Heat welding
Heat welding is optional for rolls
Heat-welding is optional for tiles
Maintenance
Follow detailed maintenance instructions.
Maintenance Instuctions PDF format
Limited Warranties
Limited warranties vary by product, and are applicable only if materials are installed professionally on suitable and approved sub-floors Concrete Subfloors Moisture Testing Specification with approved adhesives and within the approved moisture limits, on sub-floors which have a permanent Moisture Barrier and are dry < 3.0 lb/1000 sft. vapor emissions; 85% rH and with a pH of 7-9 per.