Dotfloor AP Physical Properties
Physical Properties
| Physical Properties | Remp Rubber Flooring | Requirement | Ardesia | Unifloor AP |
Unifloor DOT |
| B101.1 ANSI/NFSI | Wet SCOF of Common Hard-Surface Floor Materials. | > .6 | > .6 | > .6 | > .6 |
| ASTM D2240 | Hardness Shore A | ||||
| ISO 7619 | Hardness | > 75 shore A | 88 (+/- 5) | 88 (+/- 5) | 88 (+/- 5) |
| EN 443 | Residual Indentation | < .25mm | .15 mm | .15 mm | .15 mm |
| EN 1399 Methods A,B | Cigarette Burn Resistance (stubbed out and burning) | passes | passes | passes | |
| ISO 4649 Procedure A | Abrasion Resistance at 5N load | > 250 mm3 | 130 mm3 | 1430 mm3 | 1430 mm3 |
| ASTM E648, NFPA 101 | Critical Radiant Flux | ||||
| EN 134-501 | Fire Resistance | Bfl-S1 | passes | passes | passes |
| ASTM E662 | Optical Smoke Density | < 450 | |||
| DIN 53-436 | Toxicity of Gases | Non Toxic | Non Toxic | Non Toxic | |
| ASTM D5116 VOC | Volatile Organic Compounds Compliance | yes | yes | yes | |
| VDE 0303 T.30 | Electrical Insulation Properties | > 1010 ohms | > 1010 ohms | > 1010 ohms | |
| DIN 52612 | Thermal conductivity (suitability for sub-floor heating) | .35 W/mK | .43 W/mK | .43 W/mK | |
| EN20 105-B02 | Color Fastness to Artificial Light | < 3 gray scale / < 6 blue scale | good | good | good |
| EN 434 | Dimensional Stability | ( +-) 0.4% | ( +-) 0.3% | ( +-) 0.3% | ( +-) 0.3% |
| AST F970 | Static Load Limit 1000psi at 50 psi | residual indentation 0.00" | passes | passes | passes |